May 30, 2010 Shoot - With class changes
Yes that is right! I am bowing to pressure. We will have 3 classes this next match. Tactical, Unlimited and heavy metal, so pick your poison.
Below are the match rules and class descriptions.
Holsters
The match will require the use of a holster for the handgun or revolver used during the match. The use of a particular type or brand of holster will not be required. However competitors will not be permitted to commence a course of fire wearing
A shoulder holster or “tie-down” rig (visible or otherwise)
A holster, which does not completely prevent access to, or activation of, the trigger of the handgun while holstered.
Rifle - (60 Rds Minimum)
Open
No limitations on accessories, except that “Beta C”, specifically, and/or any drum magazines are NOT allowed in this division.
Rifle supporting devices (i.e. bipods, etc.) may be added or removed during the course of the event.
Tactical
Firearms must be of a factory configuration
Internal modifications are allowed providing the modifications do not alter the original factory configuration of the rifle.
Iron Sights only (No optical sights)
Rifle supporting devices (i.e. bipods, etc.) are not allowed in this division.
Compensators are allowed in this division provided the compensator is not larger than 1 inch in diameter and 3 inches long, measured from the barrel muzzle to the end of the compensator.
“Beta C”, specifically, and/or any drum magazines are NOT allowed in this division.
Heavy Metal
Rifles in HM must comply with Tactical Rifle Rules
Rifles in HM will be .308 Winchester (7.62x51 NATO) minimum.
Rifle magazines in HM shall not be loaded with more than eight (8) rounds
Shotgun- (40 Rds Minimum)
Open
No limitations on accessories
Barrel length may not be changed for the duration of the event.
Magazine tube length shall not be changed for the duration of the event.
Shotgun speed loaders are allowed in Open.
Tactical
Shotguns must be of a factory configuration
Conventional tubular magazine fed shotguns, only, allowed in this division.
Barrel length may not be changed for the duration of the event.
Internal modifications are allowed providing the modifications do not alter the original factory configuration of the shotgun.
No electronic or optical sights are allowed on shotguns in this division.
No shotgun supporting devices (i.e. bipods, etc.) are allowed in this division.
No compensators or porting on barrels allowed in this division.
No shotgun speed loaders are allowed in this division.
No shotgun in tactical division may start a stage with more than 9 rounds total in the shotgun.
Heavy Metal
Shotguns must comply with Tactical Shotgun Rules
12 gauge only.
Handguns- (150 Rds Minimum)
Open
No limitations on accessories
Magazine length may not exceed 170 millimeters.
Tactical
Firearms must be of a factory configuration.
Internal modifications are allowed providing they do not alter the original factory configuration of the handgun.
Firearms with custom or factory installed electronic sights, optical sights, extended sights, compensators or barrel porting are NOT allowed in this division.
Magazines used shall not exceed 170 mm OAL (overall length) for single stacks, and shall not exceed 140 mm OAL for staggered magazines.
Heavy Metal
Firearms must comply with the Tactical handgun rules
.44 Caliber or larger (non magnum).
Magazines may be loaded with no more than 10 rounds.
230 Gr. Round ball ammo only
Last edited by corky43; 05-25-2010 at 02:36 PM.
|
Linear Mode
